Varighet på lume
- Trådstarter twt2
- Opprettet
- Medlem
- 11. mars 2013
- Innlegg
- 569
Synes det er rart hvis ikke Seiko holder gjennom natten. Jeg er ikke spes mye ute i friluft og klokken er ofte dekket av jakke osv men allikevel så lyser den opp veggen eller puta når jeg legger meg. Neste morgen etter 6-8 timers søvn så lyser den fortsatt mere enn godt nok til og lese av tiden. Dette gjelder alle Seikoene mine fra Skx og turtlene til baby Tuna 
Orientene mine duger også, men er ikke i nærheten av Seiko lume
Orientene mine duger også, men er ikke i nærheten av Seiko lume 
Hvalrossen
Støttemedlem
Min Grand Seiko SBGA031 lyser i hvert fall vedig godt også om morgenen. Slår de andre klokkene i lume, så den bør klare en natt i telt.
Hvorfor ikke gå til spesialisten for klokken du spør etter? Lum-Tec produserer klokker med såkalt Maximum Darkness Visibility (MDV) Technology Lume:
This is a special 6-8 layer application of Super-LumiNova applied over a chemical coated white base, causing an incredibly bright luminescent light charge. The dials design process took 9 months to reach perfection. We used a custom made Super-LumiNova compound from Switzerland's finest luminous compound manufacturer, RCtritec. This method of application requires the dials to be printed first with a titanium dioxide base coat, and then with six layers of custom made Grade A Super-LumiNova.
All prototypes are hand made, and the factory machinery replicates the curves, height, and finish (in factory, the lume is applied with a CNC stylograph). We lay down a layer of white colored titanium dioxide by rotary print, then 6 layers of Super-LumiNova followed by a layer of clear gloss coat. Each step of this unique method must be done very extreme care so the overall aspect and finish of the watch are as close as perfection as can be.
Eksemplet ovenfor er en Combat B31 Bronze til USD 1000, men de har mange andre modeller også, sjekk nettstedet. Inni de fleste sitter det et Miyota-verk. Noen kan kanskje ha problemer med det.
Skal visstnok lyse like sterkt i 24 timer.
Lum-Tec produserer klokker med såkalt Maximum Darkness Visibility (MDV) Technology Lume:This is a special 6-8 layer application of Super-LumiNova applied over a chemical coated white base, causing an incredibly bright luminescent light charge. The dials design process took 9 months to reach perfection. We used a custom made Super-LumiNova compound from Switzerland's finest luminous compound manufacturer, RCtritec. This method of application requires the dials to be printed first with a titanium dioxide base coat, and then with six layers of custom made Grade A Super-LumiNova.
All prototypes are hand made, and the factory machinery replicates the curves, height, and finish (in factory, the lume is applied with a CNC stylograph). We lay down a layer of white colored titanium dioxide by rotary print, then 6 layers of Super-LumiNova followed by a layer of clear gloss coat. Each step of this unique method must be done very extreme care so the overall aspect and finish of the watch are as close as perfection as can be.
Eksemplet ovenfor er en Combat B31 Bronze til USD 1000, men de har mange andre modeller også, sjekk nettstedet. Inni de fleste sitter det et Miyota-verk. Noen kan kanskje ha problemer med det.
Skal visstnok lyse like sterkt i 24 timer.
Hvorfor ikke gå til spesialisten for klokken du spør etter?
This is a special 6-8 layer application of Super-LumiNova applied over a chemical coated white base, causing an incredibly bright luminescent light charge. The dials design process took 9 months to reach perfection. We used a custom made Super-LumiNova compound from Switzerland's finest luminous compound manufacturer, RCtritec. This method of application requires the dials to be printed first with a titanium dioxide base coat, and then with six layers of custom made Grade A Super-LumiNova.
All prototypes are hand made, and the factory machinery replicates the curves, height, and finish (in factory, the lume is applied with a CNC stylograph). We lay down a layer of white colored titanium dioxide by rotary print, then 6 layers of Super-LumiNova followed by a layer of clear gloss coat. Each step of this unique method must be done very extreme care so the overall aspect and finish of the watch are as close as perfection as can be.
Vis vedlegg 36166 Vis vedlegg 36167
Eksemplet ovenfor er en Combat B31 Bronze til USD 1000, men de har mange andre modeller også, sjekk nettstedet. Inni de fleste sitter det et Miyota-verk. Noen kan kanskje ha problemer med det.
Skal visstnok lyse like sterkt i 24 timer.
Brukte nylig denne klokka (med annen farge på skiva) på fjellet og husker jeg ble overrasket på morningen når jeg kastet et blikk på klokka og tiden lyste mot meg. Myr bedre enn på f.eks min deepsea.
Gå for Lumtec!