Det blir Kyoto på meg!Blir helt nervevrak av sånn førstemann til mølla-opplegg
Venter også Kyoton. Tidligere Ming synes jeg har levert på kvalitet og unik look
MING Watches
- Trådstarter Pippen
- Opprettet
Venter også Kyoton. Tidligere Ming synes jeg har levert på kvalitet og unik look
Er det lov å si at urverket har litt kjip finish til å være så dyr?
(og hvorfor MÅ så og si alle urene deres være i 38mm??)
Litt rimeligere jubileumsfeiring (men ikke veldig?):
Horologer MING - 5th Anniversary Poster - MING x OHW
5th Anniversary Poster - MING x OHW
www.ming.watch
Qwestern
Støttemedlem
Greit dyr for en poster. Begynner å lukte litt melking her syns nå jegVis vedlegg 303920
Litt rimeligere jubileumsfeiring (men ikke veldig?):
Horologer MING - 5th Anniversary Poster - MING x OHW
5th Anniversary Poster - MING x OHW
Fikk min første Ming i dag Måtte ta lume bilde av den
Måtte ta lume bilde av den
chrbir
Støttemedlem
Fin pakke dette, men hva i all verden drar prisen til 250k? Er ikke dette tilnærmet 100% maskinprodusert?
mye av forklaringen ligger nok her:
[…men med tanke på at man kan handle seg en jaeger-lecoultre reverso tribute chronograph for samme sum, så fremstår ikke ming 29.01 som akkurat noe røverkjøp - snarere et røversalg - og hva er vel en fremtidig ming da piffen fra lume omsider fader vekk inn i det sorte hull…]
Schwarz-Etienne - Swiss Watch Manufacturer
With technical and human know-how, Schwarz-Etienne masters the design and manufacture of its movements and most of its watch components in La Chaux-de-Fonds
www.schwarz-etienne.ch
Redigert:
Qwestern
Støttemedlem
Jon Henrik
Ansvarlig redaktør
MING klinker til med verdens letteste serieproduserte mekaniske klokke!
MING lanserer den ultralette LW.01
MING klinker til med verdens letteste serieproduserte mekaniske klokke.
www.tidssonen.no
Ming 22.01 GMT Kyoto
Here we have a GMT watch from the independent manufacturer Horologer Ming.
On a closer look, we can see that the text on the dial is really crisp and here we also see the Luminova that is applied to the inside of the crystal.
It is 38mm in diameter, sapphire glass on both sides, the case is made of grade 5 titanium.
An independently adjustable 24-hour hand and a 24-hour scale at the composite, three-part dial where the grey background provides a good contrast to the 24-hour hand.
On the sides, the titanium is brushed and a solid, easy-to-operate crown.
In the concave bezel, there is a flat sapphire crystal with anti-reflection on both sides with a total thickness of 10.7mm.
A green barenia strap with the unique tuck buckle.
Where you tuck the end of the strap inside, which means that you don't see the end of the strap.
At the backside we see the Cal. 330.M2 – based on the Sellita SW330-2 with a power reserve of 50 hours.
It comes in black color and is assembled by Schwarz-Etienne in Switzerland.
The innermost part of the dial has a grained finish in grey and matching the green GMT hand.
There is some kind of stamp at the dial at 11:30 beside the 24 hour scale. I don't really know what it is, maybe something to prove authenticity?
I think this is a well-balanced model in a good size that fits really well on my 7.5" wrist.
There is a lot of Luminova on this one.
Here we have a GMT watch from the independent manufacturer Horologer Ming.
On a closer look, we can see that the text on the dial is really crisp and here we also see the Luminova that is applied to the inside of the crystal.
It is 38mm in diameter, sapphire glass on both sides, the case is made of grade 5 titanium.
An independently adjustable 24-hour hand and a 24-hour scale at the composite, three-part dial where the grey background provides a good contrast to the 24-hour hand.
On the sides, the titanium is brushed and a solid, easy-to-operate crown.
In the concave bezel, there is a flat sapphire crystal with anti-reflection on both sides with a total thickness of 10.7mm.
A green barenia strap with the unique tuck buckle.
Where you tuck the end of the strap inside, which means that you don't see the end of the strap.
At the backside we see the Cal. 330.M2 – based on the Sellita SW330-2 with a power reserve of 50 hours.
It comes in black color and is assembled by Schwarz-Etienne in Switzerland.
The innermost part of the dial has a grained finish in grey and matching the green GMT hand.
There is some kind of stamp at the dial at 11:30 beside the 24 hour scale. I don't really know what it is, maybe something to prove authenticity?
I think this is a well-balanced model in a good size that fits really well on my 7.5" wrist.
There is a lot of Luminova on this one.